TOHATSU MFS 60A Service Manual page 53

13. Remove flywheel and key.
å Flywheel Holder :
Commercially available item
å Flywheel Puller :
Use puller contained in the following puller kit.
∫ Flywheel Puller Kit :
P/N. 3T1-72211-0
Apply forces to tools toward directions as shown,
and perform work taking care not to allow flywheel
holder to remove.
Screw puller onto crankshaft end until flywheel is
disengaged from tapered section of crankshaft.
To prevent damages to engine and special tools,
tighten flywheel puller set bolts evenly and keep
flywheel puller parallel to flywheel while working.
Disconnect alternator e and pulser coil r .
14.
Remove bolts of alternator and coil bracket t, and remove
15.
alternator and coil bracket.
4st 60 2019
CAUTION
CAUTION
å
∫
e
t
5
r
5-21