TOHATSU MFS 60A Service Manual page 87

Install PTT switch coupler 0 and PTT motor leads q.
8.
Positive Battery Cable Nut :
4 N·m (3 lb·ft) [ 0.4 kgf·m ]
PTT Motor Lead Bolt :
4 N·m (3 lb·ft) [ 0.4 kgf·m ]
Reconnect couplers w (3 pices), and then place them into
9.
cable terminal holder e and install holder cover.
Connect battery cables r.
10.
11. Install key and flywheel.
Apply forces to tools toward directions as shown,
and perform work taking care not to allow flywheel
holder to remove.
Flywheel Puller Kit :
P/N. 3T1-72211-0
Flywheel Nut :
150 N·m (108 lb·ft) [ 15.0 kgf·m ]
12. Reinstall flywheel cover.
13. Fill with specified amount of engine oil.
Recommended Engine Oil :
OIL
4 Stroke Engine Oil
API : SH, SJ, SL
SAE : 10W-30 , 10W-40
Quantity of Engine Oil:
When oil filter is not replaced : 2.2 L
When oil filter is replaced : 2.4 L
Crank engine with lanyard removed to build oil
pressure before test running the engine.
4st 60 2019
CAUTION
q q
0 0
e
w
5
r r
5-55