TOHATSU MFS 60A Service Manual page 52

Power Unit
Disconnect the fuel hose 8 and flushing hose 9 .
8.
Remove oil level gauge 0.
9.
Disconnect cooling water (fuel cooler) hoses q.
10.
11. Remove tapping screws (L = 4 pieces. S = 3 pieces.) and bolt
(one piece.), then remove apron.
Remove power unit by removing bolts w (8) and then lifting it.
12.
• When lifting power unit, perform the work
carefully, checking if wires and hoses are caught
by other parts.
• Loosen the bolts to reverse tightening sequence.
5-20
8 8
9 9
q q
0
0
w w
4st 60 2019