TOHATSU MFS 60A Service Manual page 58

Power Unit
4. Remove camshaft pulley, cylinder head cover and hose.
To remove, refer to the "Removing Timing Belt
and Pulley" section in Chapter 5.
5. Remove cylinder head bolts in the reverse sequence of
order shown, and remove cylinder head.
Do not scratch or give damage to mating surfaces of
cylinder head and cylinder block.
To loosen "No. 7" bolt, loosen fuel pump lift bolt
1, and then remove fuel pump lift.
Loosen rocker arm lock nuts 2, and loosen adjusting screws
6.
as much as possible.
Remove oil pump ass'y 3.
7.
Remove rocker arm shaft ass'y 4.
8.
• The work can be made easier when cam shaft
is brought to a position of low valve spring
force.
• Bind with tie wrap, to remove easier.
Remove cam shaft mounting bolt 5 and cam shaft 6.
9.
5-26
CAUTION
5 6
11
9
2
4 3
10
8 7
12
3
2
4
5
6
1
2
4st 60 2019