Bundling Steps; Installation Verification; Checking The Ap; Checking Cable Connection - Ruijie RG-MAP852-SF-U Hardware Installation And Reference Manual

Hardware Installation Guide
performance.
3.6.2

Bundling Steps

(1) Bundle the hanging part of the twisted pairs by using cable ties and lead them to the
LAN/PoE port end of the AP by convenience.
(2) Fasten the twisted pair cables to the cable trough of the mounting bracket.
(3) Extend the twisted pair cables under the device and route them in a straight line.
3.7

Installation Verification

3.7.1

Checking the AP

Check whether the external power supply matches the AP.

Ensure that the AP is securely installed and will not move or fall.

3.7.2

Checking Cable Connection

Make sure that the twisted pair cable matches the port type.

Verify that cables are properly bundled.

3.7.3

Checking the Power Supply

Verify that the power cord is properly connected and compliant with safety

requirements.
Turn on the power supply to supply power to the AP. Verify that the AP works properly.

30
Installation