Precautions; Installing The Device; Embedding In An 86-Type Panel - Ruijie RG-MAP852-SF-U Hardware Installation And Reference Manual

Hardware Installation Guide
3.3

Precautions

To ensure the normal operation and prolonged service life of the AP, observe the
following safety precautions:
Do not power on the device during installation.

Install the device in a well-ventilated location.

Do not subject the device to high temperatures.

Keep the device away from high-voltage power cords.

Install the device indoors.

Do not expose the device in a thunderstorm or strong electric field.

Keep the device clean and dust-free.

Cut off the power switch before cleaning the device.

Do not wipe the device with a damp cloth.

Do not wash the device with liquid.

Do not open the enclosure when the device is working.

Fasten the device tightly.

3.4

Installing the Device

Note
For RG-MAP852-SF-U, the 172-type panel is recommended for installation. If the
installation condition does not permit, the 86-type panel is recommended for installation.
3.4.1

Embedding in an 86-type Panel

(1) Use a screwdriver to remove the panel of an 86-type panel from the wall. (If there is no
86-type panel, ignore this step.)
20
Installation