Ruijie RG-MAP852-SF-U Hardware Installation And Reference Manual page 19

Hardware Installation Guide
Indicator
Status
Quick off
after
blinking
red
Blinking
green at an
interval of
0.2s
Off after
blinking
green
Blinking
red at an
interval of
0.2s
Table 1-10
Button
Reset
button
Blinking
Description
Frequency
of the AP is in linkdown state.
On for 3s
The CAPWAP tunnel established between the AP and AC is
timed out.
Off for 1s
On for 0.2s
The software system of the AP is being updated. During
this process, the AP cannot be powered off.
Off for 0.2s
On for 3s
The software system runs properly, the AP works properly,
and the CAPWAP tunnel status is normal.
Off for 1s
On for 0.2s
The AP enables the indicator locating function to locate the
specified AP.
Off for 0.2s
Reset Button
Operation Result
Press the
button for Reboot the device.
less than 2s
Press and
hold the
button for Restore to factory settings.
longer than
5s
11
Product Introduction