Power Supply And Consumption - Ruijie RG-MAP852-SF-U Hardware Installation And Reference Manual

Hardware Installation Guide
Port
Status Indicator
Button
1.4.4

Power Supply and Consumption

Table 1-7 Power Supply and Consumption
Port
Power Supply
Power Supply to
External Devices
Maximum Power
Consumption
Power Redundancy
Caution
This product supports PoE power supply using photoelectric hybrid cables only when

it is connected with RG-AM5528-SF.
The AP adopts a fan-free design. Therefore, maintain sufficient clearance around the

AP for air circulation.
When a laptop using a power adapter for power supply is used to manage a single

AP over a serial port, power on the AP before connecting the serial port of the laptop
to the AP.
RG-MAP852-SF-U
One system status indicator (it can be hidden and the silence
mode can be disabled)
One reset button
RG-MAP852-SF-U
(1) DC power supply (DC input voltage and current: 48 V/0.5 A)
(2) Power supply using a photoelectric hybrid cable (meeting
the IEEE 802.3af PoE standard)
Not supported
15 W
Not supported
9
Product Introduction