Environment And Reliability; Indicators And Buttons - Ruijie RG-MAP852-SF-U Hardware Installation And Reference Manual

Hardware Installation Guide
1.4.5

Environment and Reliability

Table 1-8 Standard Compliance
Environment and
Reliability
Temperature
Humidity
Regulatory compliance
1.5

Indicators and Buttons

Table 1-9 System Indicator Status in Fit AP Mode
Indicator
Status
Off
Steady
green
Steady red
RG-MAP852-SF-U
Operating temperature: –10°C to +40°C (14°F to 104°F)
Storage temperature: –40°C to +70°C (–40°F to +158°F)
At a height between 3,000 m (9,842.52 ft.) and 5,000 m
(16,404.20 ft.) above the sea level, every time the altitude
increases by 166 m (546 ft.), the maximum temperature
decreases by 1°C.
Operating humidity: 5% to 95% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing)
EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301
489-1, EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN
300 440, FCC Part 15, EN IEC 62311, IEC 62368-1, and EN
62368-1
Blinking
Description
Frequency
The AP is not powered on. Alternatively, the AP is powered
N/A on, but the indicator is turned off using the software
function.
N/A The software system of the AP is being initialized.
N/A
The system runs properly. However, the uplink service port
10
Product Introduction