Hardware Installation Guide
2
Preparing for Installation
2.1
Safety Precautions
Note
To avoid personal injury and device damage, carefully read the safety precautions
before you install the device.
The following safety precautions may not cover all possible dangers.
2.1.1
General Safety Precautions
Do not expose the AP to high temperature, dusts, or harmful gases. Do not install the
AP in an inflammable or explosive environment. Keep the AP away from EMI sources
such as large radar stations, radio stations, and substations. Do not subject the AP to
unstable voltage, vibration, and noises.
The installation site should be free from water flooding, seepage, dripping, or
condensation. The installation site should be selected according to network planning,
communications equipment features, and considerations such as climate, hydrology,
geology, earthquake, electrical power, and transportation.
Keep the site where the device is installed dry, so it is not recommended to install the
device near the ocean. Keep the device at least 500 meters away from the ocean and
do not face it towards the sea breeze.
Do not place the device in walking areas.
During the installation and maintenance, do not wear loose clothes, ornaments, or any
other things that may be hooked by the chassis.
Keep tools and components away from walking areas.
2.1.2
Handling Safety
Avoid moving the device frequently.
Cut off all the power supplies and unplug all power cords before moving or handling
the device.
12
Preparing for Installation
Need help?
Do you have a question about the RG-MAP852-SF-U and is the answer not in the manual?