Environment And Reliability; Led And Button - Ruijie RG-AP680-IO Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
1.4.5

Environment and Reliability

Table 1-8 Standard Compliance
Environment and
Reliability
Temperature
Humidity
IP Rating
Anti-corrosion rating GB/T 2423.17
Regulatory
compliance
1.5

LED and Button

Note
The LED description applies to both fit and fat modes unless otherwise specified.
Table 1-9 LED Status
Status
Off
RG-AP680-IO
Working temperature: –40°C to +65°C (–40°F to +149°F)
Storage temperature: –40°C to +85°C (–40°F to +185°F)
At a height between 3000 m (9842.52 ft.) and 5000 m (16404.2 ft.),
every time the altitude increases by 166 m (546 ft.), the maximum
temperature decreases by 1°C (1.8°F).
Operating humidity: 0% to 100% RH (non-condensing)
Storage humidity: 0% to 100% RH (non-condensing)
IP68
EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301 489-
1, EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN 300
440, FCC Part 15, EN IEC 62311, IEC 62368-1, EN 62368-1, and IEC
60950-22
Frequency
N/A
Description
The AP is not powered on.
The AP is powered on, but the LED is manually
10
Product Introduction