Installing Components; Component Installation Positions - Huawei PowerCube 1000 Installation Manual

Table of Contents

Advertisement

PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide

8 Installing Components

8
Installing Components

8.1 Component Installation Positions

Figure 8-1 Component installation positions in ICC800 (5 KW)
Issue 02 (2021-09-28)
Copyright © Huawei Technologies Co., Ltd.
86

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerCube 1000 and is the answer not in the manual?

Questions and answers

Isah Ibrahim
April 15, 2025

How to configure Solar system on Huawei power cube 1000 hybrid solution

1 comments:
Mr. Anderson
April 15, 2025

To configure the solar system on the Huawei PowerCube 1000 hybrid solution:

1. Connect the PV Supply: Follow the procedure to connect the photovoltaic (PV) solar power supply to the system (as indicated in section 12.4 of the manual).

2. Connect the Lithium Battery Supply: Install and connect the lithium battery (ESU-A2400Wh/D or ESU-A2400Wh/N) to support energy storage (section 12.5).

3. Connect the Load Supply: Ensure that the load devices are properly connected to receive power (section 12.6).

4. Remote Management (Optional): Use NetEco for remote energy monitoring and management if required.

5. System Check: Perform a system check before leaving the site to confirm proper installation and operation.

This setup allows the PowerCube 1000 to operate in solar, grid, or hybrid modes.

This answer is automatically generated

Table of Contents

Save PDF