Installing An Ac Input Module - Huawei PowerCube 1000 Installation Manual

PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide
This step is required if the DG expansion board is used for 4G wireless networking.
The SIM card inserted into the DG expansion module should support GSM,
WCDMA, TD-SCDMA, TDD, and FDD standards, and have the SMS and data
service functions enabled.
Figure 8-6 Installing a SIM card
(1) SIM card
Step 4 Gently insert the DG expansion module into its slot along the guide rails.
Step 5 Push the handle leftward and tighten the screws.
Figure 8-7 Installing a DG expansion module
----End

8.5 Installing an AC Input Module

Procedure
Step 1 Gently push AC input module 1 into its slot along the guide rails.
Issue 02 (2021-09-28)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 Installing Components
(2) SIM card slot
91