Setting The Pvdu Power Cascading Port Parameters; Setting The Power Input Parameters - Huawei PowerCube 1000 Installation Manual

PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide
Main Menu Second
-Level
Menu
----End

12.2.5 Setting the PVDU Power Cascading Port Parameters

Table 12-8 Setting the PVDU power cascading port parameters
Main Menu Second-Level
Menu
Parameters Digital Power
Settings

12.2.6 Setting the Power Input Parameters

Procedure
Step 1 Set the DG AC parameter.
Table 12-9 Setting the DG AC parameter
Main Menu Second-Level
Menu
Parameters Genset
Settings
Issue 02 (2021-09-28)
Third-Level Fourth-
Menu Level
Menu
Third-Level Fourth-Level
Menu Menu
DC Output Branch Usage
Distribut. Config 1
Branch Usage
Config 2
Third-Level
Menu
Genset n
Copyright © Huawei Technologies Co., Ltd.
12 Power-on and Commissioning
Fifth-Level Setting
Menu
PD Duration 0 min
Exempt Period Disable
No Bk
Exempt Start 00:00:00
Time
Exempt 0 min
Duration
Fifth-Level
Menu
Branch n
Usage Config
Branch n
Usage Config
Third-Level Default
Menu Value
Output Mode 3-Phase 4-
Wire
Value Range
0–1440
Disable/Enable
HH:MM:SS
0–1440
Value Range
Power Cascading
Port
NOTE
For example, if the
PVDU is connected
to intelligent circuit
breaker branch n,
set Branch n Usage
Config to Power
Cascading Port.
Setting
Set this
parameter as
required.
127