Setting Communications Parameters - Huawei PowerCube 1000 Installation Manual

PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide
Table 12-18 Setting alarm conditions for dry contact outputs
Main Menu
Parameters
Settings
Table 12-19 Setting alarm conditions for dry contact inputs
Main Menu
Parameters
Settings
----End

12.2.12 Setting Communications Parameters

IP Networking
Step 1 Set the IP type, IP address, subnet mask, and gateway address on the LCD.
Table 12-20 Setting IP parameters
Main Menu Second-Level
Menu
Parameters Comm.
Settings Parameters
Issue 02 (2021-09-28)
Second-Level Third-Level
Menu Menu
Alarm DO Dry Contact
Parameters Para.
Second-Level Third-Level
Menu Menu
Alarm DI Dry Contact
Parameters Para.
Third-Level
Menu
Network
Parameters
Copyright © Huawei Technologies Co., Ltd.
Default Value
ALM1 Alarm
Action
Default Value
DIN1 Alm. Cond.
Fourth-Level Default
Menu Value
IP Type IPv4
IP Address 192.168.0.10
Subnet Mask 255.255.255.0
12 Power-on and Commissioning
Setting
Close, Open
Setting
Close, Open
Setting
Set this parameter
as required.
Set this parameter
according to the
address information
provided by the
network
administrator.
Set this parameter
according to the
address information
provided by the
network
administrator.
134