Drilling Holes And Installing Expansion Sleeves - Huawei PowerCube 1000 Installation Manual

PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide
Figure 7-2 Marking mounting holes for two cabinets
----End

7.2 Drilling Holes and Installing Expansion Sleeves

Procedure
Step 1 Remove the cabinet pallet and take out the flat washer.
Figure 7-3 Remove the cabinet pallet
Step 2 Replace the flat washers on the expansion bolts with the removed flat washers
and the flat washers in the cabinet.
Issue 02 (2021-09-28) Copyright © Huawei Technologies Co., Ltd.
7 Installing the Cabinet
73