Installing Floating Nuts - Huawei PowerCube 1000 Installation Manual

PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide
Preparing an OT Terminal
Figure A-2 Preparing an OT terminal
(1) Cable
(4) Hydraulic pliers
A.4 Installing Floating Nuts
This section describes the positions and procedures for installing floating nuts for
components of different heights.
Prerequisites
Required tools such as a flat-head screwdriver and protective gloves are available.
Procedure
Step 1 Determine the mounting holes for floating nuts based on the module height.
Figure A-3 Positions for installing floating nuts for a 1 U module
Figure A-4 Positions for installing floating nuts for a 2 U module
Issue 02 (2021-09-28)
(2) OT terminal
(5) Heat gun
Copyright © Huawei Technologies Co., Ltd.
A Appendix
(3) Heat shrink tubing
149