Installing Can Communications Cables; Installing Cables Between The Esc800 And The Icc800 - Huawei PowerCube 1000 Installation Manual

PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide

10.4 Installing CAN Communications Cables

A build-out resistor needs to be installed for the ESM at the last level of CAN
communication.
Figure 10-10 Installing CAN communications cables
(1) Build-out resistor
10.5 Installing Cables Between the ESC800 and the
ICC800
Procedure
Step 1 Install cables for cascaded digital temperature and humidity sensor.
Issue 02 (2021-09-28)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
10 Installing Cables
112