KidKraft RIDGEMOOR PERCH SWING SET Manual page 61

Step 21: Slide Section Assemblies
Part 2
Note: When installing Pan Bolts make sure to look at holes so bolts go through the side with the
round recess and the lock nuts go through the side with the hexagonal recess. (fig. 21.3)
D: Attach TNR2 Slide Exit Top and the remaining TNR2 Slide Elbow together using 8 (PB1) Pan Bolts (with
lock nut) as shown in fig. 21.4. It is very important to attach bolts as indicated. This creates the Exit Elbow
Assembly.
Fig. 21.4
PB1
TNR2
Slide
Elbow
Fig. 21.3
PB1
TNR2
Slide Exit
Top
LN1
Hardware
8 x Pan Bolt (LN1)
PB1
61
PB1
LN1
PB1
LN1
Other Parts
1 x TNR2 Slide Exit Top
1 x TNR2 Slide Elbow