KidKraft RIDGEMOOR PERCH SWING SET Manual page 52

Step 15: Attach Rock Wall Assembly to Fort
Part 1
A: Place Rock Wall Assembly centred in opening of the Back Wall as shown in the Fort Guide and flush as shown
below. Attach (2776) Rock Rails to the Back Wall using 4 (S11) Wood Screws. (fig. 15.1 and 15.2)
B: Attach 1 (2779) Access Board to top of Rock Wall Assembly, flush to top of (2776) Rock Rails using 4 (S20)
Wood Screws. (fig. 15.3)
Note: Make sure (2776) Rock Rails do not cover the bolt head, move assembly over so it is tight to the bolt
head. (fig. 15.1 and 15.2)
Fig. 15.1
Panel
Flush
Bolt
Head
Fig. 15.4
Wood Parts
1 x Access Board
2779
S11
2776
Fig. 15.3
S20
Hardware
4 x
S20
4 x
S11
S11
2776
2779
2776
S20
Wood Screw
Wood Screw
52
Fig. 15.2
S11
Flush
2776