KidKraft RIDGEMOOR PERCH SWING SET Manual page 66

Step 25: Attach Exit End Assembly to Fort
A: Fit the Exit End Assembly to the last Elbow Assembly by lining up the arrows on each assembly. Notice the
elbow orientation. (fig. 25.1). Attach with 6 (¼ x 12.7 mm) Pan Bolts and Square Lock Nuts. (fig. 25.2)
Fig. 25.1
Top Slide Bolt Holes
Elbow
Assembly
Make sure arrows are aligned
Exit Elbow
Assembly
1/4 x 12.7mm
Pan Bolt
66
Fig. 25.2
6 x 1/4" x 12.7mm Pan Bolt
6 x 1/4" Square Lock Nut
Square
Lock Nut
Other Parts