KidKraft RIDGEMOOR PERCH SWING SET Manual page 98

Step 38: Attach Crow's Nest
Part 4
H: On the front and back of the (2614) Engineered Beam predrill holes using the Swing Bracket as a guide and a 1/8"
(3.2mm) drill bit. Ensure the holes are 1" (25.4mm) deep and that the brackets are square to the Beam. (fig. 38.9)
I: Fasten the Brackets to the Beam with 1 (WL3) Wafer Lag (with lock washer and flat washer) per side. (fig. 38.10)
Fig. 38.9
Fig. 38.10
11194
WL3
LW1
FW1
2614
2 x Wafer Lag (lock washer, flat washer)
WL3
FW1
LW1
Hardware
98
11194
WL3