KidKraft RIDGEMOOR PERCH SWING SET Manual page 112

Step 41: Sky Windows
Part 1
A: Place 2 (11374) Top Roof Post on a hard, flat surface with the notches at the top facing up. (fig. 41.1)
B: Place (11373) Lookout Wall Back in the grooves and tap in a (TN2) T-nut at each end.
C: Make sure the parts are flush and square. Fasten all with 2 (WB2) Wafer Bolts (with flat washer) connecting to
the previously installed t-nuts.
D: Repeat the above steps to make a second frame.
Fig. 41.1
TN2
11374
FW2
WB2
Wood Parts
2 x Lookout Wall Back
11373
4 x Top Roof Post
11374
11373
Flush
Hardware
4 x Wafer Bolts (flat washer, T-Nut)
WB2
11374
112
TN2
Flush
FW2
WB2