KidKraft RIDGEMOOR PERCH SWING SET Manual page 59

Step 20: Attach Slide Wall Inserts
A: In the narrow opening of the End Wall (Upper Jamb should already be installed), place the MOD Side Lite
from inside the assembly then attach to the wall and (2602) Upper Jamb with 14 (S0) Truss Screws. (fig. 20.1
and 20.2)
B: In the wider opening of the End Wall tight to (2768) Panel Floor place (8935) Lower SL Insert from inside the
assembly then attach to the wall and (2602) Upper Jamb with 4 (S0) Truss Screws. (fig. 20.1 and 20.2)
Fig. 20.1
8935
MOD
Tight
Side Lite
Wood Parts
1 x Lower SL Insert
8935
S0
x 14
MOD Side Lite
Hardware
18 x Truss Screw
S0
59
Fig. 20.2
Inside View
2602
8935
S0
Other Parts
1 x MOD Side Lite
2769