KidKraft RIDGEMOOR PERCH SWING SET Manual page 76

Step 31: Counter Assembly
Part 5
F: Tight to (2687) Counter Back attach (2685) Counter Top to each (0457) Counter Joist with 4 (TS) Trim Screws.
(fig. 31.7)
G: Tight to (2685) Counter Top and flush to the outside edges of the outer (0457) Counter Joists attach 1 (0455)
Counter Side per joist with 3 (TS) Trim Screws per board. (fig. 31.7)
H: Tight to (2685) Counter Top and centred over the middle 2 (0457) Counter Joists with ends flush to the outside
edges attach 2 (2716) Counter Mid Tops with 4 (TS) Trim Screws per board. (fig. 31.7)
I: Attach (2685) Counter Top to the panel with 2 (TS) Trim Screws per board. (fig. 31.8)
Fig. 31.7
0455
Fig. 31.8
2685
Panel
Wood Parts
2 x Counter Mid Top
2716
1 x Counter Top
2685
2 x Counter Side
0455
2685
2687
2716
0457
20 x
TS
x18
Hardware
Trim Screw
TS
76
0457
0455
0457
TS