7700 MultiFrame Manual
7714HDC High Quality Down Converter
Vertical Intensity
Detail Gain
6.5.1. Setting Image Enhancement Adjustment
Proc Functions
Image Enhancement
Enable
Disable
6.5.2. Setting RGB Clipping
Proc Functions
RGB Clip
Disable
Enable
6.5.3. Setting Gamma Adjustment
Proc Functions
Gamma Adjust
Disable
Enable
6.5.4. Setting the Gain Levels
There are six controls that set the gain of the video. For simplicity, only one control will be shown in the
manual.
Proc Functions
Y Gain
+/- 30%
7714HDC - 24
Sets the gain for vertical enhancements.
Sets the detail gain for image enhancement.
With this control the user can disable or enable all image enhancement
adjustments that have been made.
enhancement menu items (Luma Floor, Detail Noise Floor, Enhancement
Limit, Horizontal Band, Vertical Intensity, Detail Gain) without changing their
values.
With this control the user can disable or enable RGB clipping.
enabled, RGB clipping will automatically limit RGB values that fall beyond
legal limits.
With this control the user can disable or enable all gamma adjustments that
have been made. This option will override the Gamma Level menu item
without changing its values.
With these controls the user can adjust the gain of the 3 components in
either the Y Cr Cb domain or the R G B domain over a range of +/-10% in
0.1% steps.
Gain adjustments in the Y, Cb, Cr domain are made first, then gain
adjustments in the RGB domain.
adjustments.
Revision 1.1
This option will override all image
Illegal values are clipped after gain
When