Table of Contents
Advertisement
7700 MultiFrame Manual
7714HDC High Quality Down Converter
3.
SPECIFICATIONS
3.1.
SERIAL DIGITAL VIDEO INPUTS
Standards:
Number of Inputs:
Connector:
Input Equalization:
Return Loss:
SD Standards:
HD Standards:
3.2.
SERIAL DIGITAL VIDEO OUTPUTS
Standard:
Number of Outputs:
Connector:
Signal Level:
DC Offset:
Rise and Fall Time:
Overshoot:
Return Loss:
3.3.
ANALOG COMPOSITE VIDEO OUTPUT
Standard:
Number of Outputs:
Connector:
Signal Level:
Output Impedance:
DC Offset:
Return Loss:
Frequency Response: <+/- 0.1dB to 4 MHz (response will depend on selected filtering)
Differential Phase:
Differential Gain:
SNR:
Output level control range:
Black level control range:
Chroma level control range:
Hue control range:
3.4.
GENLOCK INPUT
Type:
Connector:
Termination:
7714HDC - 6
270Mb/sec SMPTE 259M or 1.485 Gb/sec SMPTE 292M – menu selectable.
SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M
1
BNC per IEC 61169-8 Annex A
Automatic to 100m @ 1.5Gb/s with Belden 1694 or equivalent cable.
>15 dB up to 540Mb/s
>15 dB up to 1. 5Gb/s
270Mb/sec SMPTE 259M
2 Program, 2 selectable with OSD
BNC per IEC 61169-8 Annex A
800mV nominal
0V ±0.5V
740ps nominal
<10% of amplitude
> 15 dB at 540MHz
SMPTE 170M (NTSC), ITU-R BT470-6 (PAL)
2 selectable with OSD
BNC per IEC 61169-8 Annex A
1V nominal
75 Ohm
0V +/- 50mV
>45dB to 10MHz
< 0.5° (< 0.3° typical)
< 0.5% (< 0.3% typical)
>75dB (black video, 100kHz to 5MHz)
±10%
±7.5 IRE
±10%
±15 deg. (NTSC only)
HD Tri-Level sync, NTSC or PAL Colour Black 1 V p-p
BNC per IEC 61169-8 Annex A
75 ohm (jumper selectable)
Revision 1.1
Advertisement
Table of Contents
