Setting The Line 21 Setup Pedestal; Setting The Composite Display Mode - Colour Or Monochrome; Setting The Analog Video Output Level; Setting The Hue - evertz 7700 Manual

7700 MultiFrame Manual
7735AVC-LB Video Composite Encoder and Audio DAC with SoftSwitch

7.5.1.2. Setting the Line 21 Setup Pedestal

Video/SID
Analog Video
Line 21 setup
On
Off
7.5.1.3. Setting the Composite Display Mode – Colour or Monochrome
Video/SID
Analog Video
Composite
display mode
Colour
B/W

7.5.1.4. Setting the Analog Video Output Level

Video/SID
Analog Video
Output level
-129 to 47
0

7.5.1.5. Setting the Hue

Video/SID
Analog Video
Hue
-17.5 to 17.5
0.0

7.5.1.6. Setting the Saturation

Video/SID
Analog Video
Saturation
-10 to 10
0%

7.5.1.7. Setting the Contrast

Video/SID
Analog Video
Contrast
0 to 20
0
7735AVC-LB - 20
When the NTSC setup pedestal is turned on using the NTSC Setup
Pedestal control, setup will be applied to all lines of the active picture
starting at line 21. The NTSC setup pedestal should not be present on line
21 when it is used for closed captions. This control allows it to be added if
line 21 closed captions are not being used.
If monochrome operation is desired on the composite output, colour may
be turned off with this control.
This control allows the user to adjust the output level of the analog video.
When set to 0, the nominal output video level will be 100 IRE.
This control allows the user to adjust the Hue of the analog video in
increments of 0.5 degrees.
This control allows the user to adjust the saturation level of the analog video
in increments of 1%.
This control allows the user to adjust the contrast of the analog video in
increments of 1%.
Revision 1.6