Overview; Figure 1: 7705Eo-Hd Block Diagram - evertz 7700 Manual

Smpte292m re-clocking electrical to fiber converter
Hide thumbs Also See for 7700:
Table of Contents

Advertisement

1.

OVERVIEW

The 7705EO-HD Electrical to fiber converter provides an economical method of connecting in-plant
coaxial distribution and longer distance optical distribution for SMPTE 292M (1.5 Gb/s) HDTV serial digital
signals. The companion 7705OE-HD Fiber to Electrical converter facilitates conversion back to coaxial
distribution at the destination. The 7705EO-HD converter features one auto-equalized coaxial input with
two reclocked serial digital outputs and one reclocked fiber output. The 7705EO-HD has been designed to
be used primarily as a reclocking 1.5Gb/s distribution amplifier and converter, however, it can also be
used as a non-reclocking SMPTE 310M (19.4 Mb/s), DVB-ASI or SMPTE 259M(143 to 540 Mb/s)
distribution product.
The 7705EO-HD is available in different versions to meet a variety of applications. (See specifications for
complete information)
7705EO13-HD
7705EO13-HD-L 1310 nm DFB
7705EO15-HD
Features:
Reclocking mode for SMPTE 292M (1.5 Gb/s) signals
Non-reclock mode for SMPTE 310M (19.4 Mb/s), SMPTE 259M (143 to 540 Mb/s) or DVB-ASI, or
most other bit rates less than 1.5 Gb/s
Fully hot-swappable from front of frame with no fiber or BNC disconnect required
Independent isolated output drivers to ensure no cross channel loading effects and maintain polarity
from input to output for DVB-ASI applications
Automatic cable equalization to 130 m
Operation with multi-mode or single-mode fiber
SC/PC, ST/PC or FC/PC connector options
Tally output on Frame Status bus upon loss of input signal
Serial Input
1.5 Gb/s
(SMPTE 292M)
7705EO-HD SMPTE292M Re-Clocking Electrical to Fiber Converter
1310 nm MQW
1550 nm DFB
Equalizer
Signal
EQ.
Present
Warning
*Note: Non-reclock Mode will operate 19.4 Mb/s to 1.5 Gb/s.

Figure 1: 7705EO-HD Block Diagram

Suitable for distances up to 6 Km @ 1.5 Gb/s
Suitable for distances up to 40 Km @ 1.5 Gb/s
Suitable for distances up to 50 Km @ 1.5 Gb/s
Re-
clock
Non-
reclock
Revision 1.7
7700 MultiFrame Manual
Cable Drivers
Optical Driver
2 Serial Outputs
1.5 Gb/s
(SMPTE 292M)
Optical Output
1.5 Gb/s
(SMPTE 292M)
7705EO-HD-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7705eo-hd

Table of Contents