Figure 1-1: 7707Oo-Hd Block Diagram - evertz 7700 Manual

7700 MultiFrame Manual
7707OO-HD SD/HD Fiber Optic Wavelength Converter
Features:
• Can be used as optical regenerator/repeater, O to E converter or O to O wavelength converter
• Auto rate selection, reclocking and indication for all SDI (SMPTE 259M) and HD-SDI (SMPTE 292M)
data rates from 143Mb/s to 1.485Gb/s
• Also supports SMPTE 305M (SDTi), SMPTE 310M (19.4Mb/s) and M2S or DVB-ASI (270Mb/s)
• Supports other Telecom/Datacom rates up to 1.5Gb/s
• Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T
G.694.2 compliant)
• DWDM wavelengths (ITU-T G.694.1 compliant) also available
• Wide range optical input (1270nm-1610nm)
• BNC outputs maintain polarity from input to output for DVB-ASI applications
• Supports single-mode and multi-mode fiber optic cable
• Comprehensive signal and card status monitoring via four digit card edge display or remotely through
SNMP and VistaLINK
• Detection & display of optical input power, video format, and EDH errors (SDI only)
• Fully hot-swappable from front of frame
Optical
Input
VistaLINK
®
Interface
7707OO-HD-2
-capable resources
®
OPTICAL
RECLOCKING
RECEIVER
SMPTE 292M
SMPTE 259M
SMPTE 305M
SMPTE 310M
SMPTE 344M
DVB-ASI
CONTROL/
INDICATION
LOCAL
CONTROL

Figure 1-1: 7707OO-HD Block Diagram

Revision 1.5
CABLE
DRIVERS
OPTICAL
DRIVER
LOCAL
INDICATION
2
Serial
Outputs
Optical
Output