Media Wall Mode; Figure 5-1: Media Wall Configurations; Table 5-4: Media Wall Mode - evertz 2430GDAC-MWP Instruction Manual

2430GDAC-MWP G-Link D to A Converter for MWP
1
2
3
4
1x4

5.1.3. MEDIA WALL MODE

DIP switch 2 selects the output media wall mode.
When in automatic media wall detection mode, the 2430GDAC-MWP determines the media wall
configuration and displays the selected region (see section 5.1.4) at the proper resolution. Standard
resolutions (XGA, SXGA, etc.) can also be displayed to a single non-media wall screen when in this mode.
When in forced media wall mode, the 2430GDAC-MWP configures itself to display a region of a 2x2 media
wall. This allows the 2430GDAC-MWP to expand a standard resolution coming from an Evertz MVP into a
2x2 media wall without explicit support in the MVP system and in the Maestro software. DIP switches 3
and 4 select the region of the media wall to display as specified in Table 5-3.
2430GDAC-MWP-8
1

Figure 5-1: Media Wall Configurations

DIP 2 Media Wall Mode
Off Force 2x2 media wall
On Automatic media wall detect

Table 5-4: Media Wall Mode

Revision 1.1
2 3
4x1
1 3
2 4
2x2
4