Introduction - NTI ENVIROMUX Series Installation And Operation Manual

NTI Power Remote Rebooter with C13 Connection

INTRODUCTION

The ENVIROMUX® Remote Power Reboot Switch is used to remotely reboot and control power (ON/OFF) to a server or other
powered device over IP.

Two operating modes for power reboot:
Manual – select the outlet and turn the power on/off/cycle.
o
Auto – scheduled, triggered, or configurable combination.
o
Scheduled – set date/time/duration of power cycle.
o
o Triggered
o Power on/off a device when a sensor connected to the digital input changes state.
o Reboot (power cycle) and control power (ON/OFF) to unresponsive IP devices that are connected to the
PWR-RMT-RBT-C13 power outlet.

Configure, control, and monitor the unit via the easy-to-use web interface or HTTP REST API– makes it easy to control
power from anywhere in the world.

Two digital inputs to monitor alarm contacts, environmental sensors, relays, and switch closures.
o Shut down power when water or other environmental threats are detected.

Two digital open collector outputs for control of external devices – drive relays for process control, security, and
environmental controls.
o Digital outputs activate upon triggered event or via the user interface.

Monitor (ping) up to two IP network devices.
o Unresponsive IP devices can be configured to trigger the outlet of PWR-RMT-RBT-C13 to power ON/OFF/Cycle.

Automatically configures network settings received from a connected DHCP server.
o If a DHCP server is not found, the default static IP address will be used.

Dual password protection with separate user and administrator passwords.

Integrated mounting brackets for easy surface/wall mounting.
Optional DIN mounting available.
o

The Remote Reboot Switch is the ideal solution for many applications, such as:
Remote reboot of any device, router, server, kiosk, etc. The device need not be network attached.
o
Secure sensitive devices by keeping them powered off when not in use. This prevents hackers from detecting them at
o
all times.
o Power down equipment when not needed for power savings and to save on wear and tear.
o Power up alert devices (sirens or lamps) or environmental systems (heaters, coolers, pumps, etc.)

Cascade an unlimited number of PWR-RMT-RBT-C13 using the digital I/O screw terminals.
o For a single user interface, use with E-MNG-SH Self-Hosted Enterprise Environment Monitoring System Management
Software. (Support coming soon.)

Flash upgradeable.

Features coming soon:
o Compatibility with E-2D, E-5D, and E-16D as an IP sensor.
o Compatibility with E-MNG-SH Self-Hosted Enterprise Environment Monitoring System Management Software.
Optional:
For a model with DIN clips to mount in a DIN rail, order PWR-RMT-RBT-C13-D
1