NTI Power Remote Rebooter with C13 Connection
FIRMWARE UPGRADE
The PWR-RMT-RBT-C13 may, at times, have changes made to its firmware. These changes can easily be applied after
installation.
There are two files that make up the PWR-RMT-RBT-C13 programming, a Firmware file, and a Webpage file. The release notes
that accompany the files when you download them from our webpage will describe what has changed. You should always
upload both the new Firmware AND Webpage files.
Note: In case of firmware upload failures, re-try loading again.
To bring up the software upgrade page, enter the following in the URL bar:
and press Enter.
<ip of Rebooter>/rbt-imageupload
Figure 24- Firmware Upgrade page for PWR-RMT-RBT-C13
From this page, you can either select the Firmware file to be uploaded or the Webpage file.
There will not be an indication of
progress during the upload, but the screens will update as shown on the next page, and this will only take 15 or 20 seconds after
the Upload button is pressed.
23