NTI Power Remote Rebooter with C13 Connection
INSTALLATION
1. Using the holes on the mounting flanges, secure the PWR-RMT-RBT-C13 in your desired location.
2. Connect one end of the power cord to the "AC IN" port in the PWR-RMT-RBT-C13, and the other end to a wall outlet. A power
source that is 90-264VAC at 50/60Hz can be connected.
Figure 1- Connect power and Ethernet cables
3. Connect the "ETHERNET" port to your LAN with a CAT5,5e/6/6a/7 cable. This cable can be up to 328 feet in length.
4. Connect the AC OUT receptacle to a 120VAC (maximum 15A) or 240VAC (maximum 10A) device to be controlled using a
suitable cable (see page 2 for cables offered by NTI).
Figure 2- Connect AC OUT cable
4