Administration Pages; Figure 16- Administration Page Settings - NTI ENVIROMUX Series Installation And Operation Manual

Remote power reboot switch with iec320 c13 outlet

Hide thumbs Also See for ENVIROMUX Series:

Table of Contents

NTI Power Remote Rebooter with C13 Connection

Administration Pages

The System Settings section includes the serial number, MAC address, firmware version, web page version, unit name that the

user assigns, and a check box to disable the pop-up warning messages (enabled by default- see page 20).

In the Admin and User Settings you can enter names and passwords. If you ever forget the Admin password, you will need to

press the "RESTORE DEFAULTS" button on the PWR-RMT-RBT-C13 for 5 seconds and login with the default username (root)

and password (nti)

At the bottom of this page are the "Save" button (be sure to press this after you enter new usernames and passwords!), "Restore

Default Configuration" (an easy quick way to clear all user settings and start over), and "Reboot" button to use to make a fresh

start of the PWR-RMT-RBT-C13.

See page 20 for further

explanation of this feature.

Default Username: root

Default Password: nti

(all lower case characters)

Table of Contents

Pwr-rmt-rbt-c13