Figure 17- Network Settings Page - NTI ENVIROMUX Series Installation And Operation Manual

NTI Power Remote Rebooter with C13 Connection
Under Administration you will find the Network Settings page.
Network Settings Description
Enable DHCP Place a checkmark to allow a DHCP server to assign the IP address and other network settings,
otherwise static network settings will be as assigned below manually.
IP Address If DHCP is not enabled, this will be the IP address of the PWR-RMT-RBT-C13
Subnet Mask Enter a valid subnet mask for static network settings
Default Gateway Enter a valid default gateway for static network settings
Preferred DNS Enter a valid DNS server
Alternate DNS Enter a valid alternate DNS server
Click "Save" after any changes are made.

Figure 17- Network Settings page

16