Section 5: Service & Maintenance
CLEANING THE PUMP DRIVE
CAUTION: Unplug the pump drive's power cable from the mains power outlet when cleaning
!
or performing maintenance on the drive.
If required, the pump drive may be wiped clean using a soft cloth lightly moistened with either isopropyl or
ethyl alcohol.
NOTE:
•
Care should be taken with the pump drive's touchscreen to avoid scratching or otherwise damaging the
surface. Do not wipe with dry or abrasive material.
•
Do not operate the pump drive with water on the surface of the touchscreen.
•
Any damage caused by improper cleaning will be the sole responsibility of the customer.
ACCESSORIES
B/T Accessories
To purchase accessories or for further information visit
available for the B/T Digital Pump Drive:
Description
Footswitch with 6 ft (1.8 m) cable and 31-Pin male connector
31-Pin male connector (no cable, connector only)
Cable assembly (31-Pin male connector and 25 ft (7.9 m) cable with
stripped wire ends)
FUSE,T6.3A, 5MM X 20MM
REPLACEMENT PARTS
Description
Rotor Assy
Spacer, Shoulder
Window
Door Assembly
Replacement Line Cord Assem 115V
Roller & Retaining Ring Kit BT
FUSE,T6.3A, 5MM X 20MM
Cable and Switch
5-2
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
www.masterfl
ex.com. Th e following accessories are
Part Number
07575-84
109736-CR
07575-80
117197
Part Number
108024-CR
109461-CR
109467-CR
109473-CR
109573-CR
109852-CR
117197
113333-CR
Masterflex