Saving Analog Input Mode Settings As A New Program - Masterflex MFLX77112-10 Operating Manual

Section 3: Operation

Saving Analog Input Mode Settings as a New Program

Changes made to mode parameters can be saved as a new program for easier access to frequently used
mode settings. NOTE: If User Management is enabled only users with authorization can create and modify
programs (for further information see
To save mode parameters to a new program:
1. If required, edit the Analog Input Mode settings as desired.
2. Tap MODE NAME BANNER to return to the Mode Selection Screen.
3. Tap NEW PROGRAM. NOTE: If NEW PROGRAM is not displayed on the Mode Selection Screen tap
SCROLL
4. Tap ANALOG INPUT. Th e Analog Input New Program Screen will be displayed with the last settings
used in the Analog Input Mode.
5. Tap PROGRAM1. If required, delete the characters using the back arrow on the onscreen keypad and
then enter the desired program name (up to 8 characters).
6. Tap CONFIRM to save or DELETE to cancel.
NOTE:
• Once saved, new programs are added in alphabetical order to the bottom of the Mode Selection Screen.
• If there are multiple programs tapping SCROLL
3-16 Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
"User
to view additional pages.
Management" on page 2-8).
will display additional pages.
Masterflex