Table of Contents
Advertisement
Section 3: Operation
VOLUME MODE
In Volume Mode the pump will operate at a selected rpm and/or fl ow rate until a selected volume of fl uid has
been pumped. When the selected volume has been pumped the drive will automatically stop.
Volume Mode Run Screen
Th e Volume Mode Run Screen is accessed by selecting VOLUME from the Mode Selection Screen.
A. Mode Name Banner
C. Cumulative Volume
G. Set Interval Time
I. Flow Rate
L. Flow Direction
A. MODE NAME BANNER: Tap the Mode Name Banner to return to the Mode Selection Screen.
B. EDIT: Tap to access the Volume Mode Edit Screen. From the Volume Mode Edit Screen adjustments can
be made to dispense volume, interval time, fl ow rate, tube options, calibration and batch total. NOTE:
Edit is inactive during operation.
C. CUMULATIVE VOLUME: Displays the current Cumulative Volume of fl uid that has been pumped. To
reset the cumulative volume: Press and hold CUMULATIVE VOLUME RESET
changes to zero.
D. BATCH TOTAL: Displays the number of dispenses that have been completed in the current batch. To
reset the batch total: Press and hold BATCH RESET
E. SET DISPENSE VOLUME: Displays the selected volume of fl uid for dispensing.
F. DISPENSE VOLUME COUNTER: Displays a countdown of the fl uid volume during operation.
G. SET INTERVAL TIME: Displays the set time the pump pauses between dispenses.
H. INTERVAL TIME COUNTER: Displays a countdown of the set interval time during operation.
I. FLOW RATE: Displays the current fl ow rate in the unit of measurement selected by the user.
J. PRIME: Press and hold to prime the pump drive (for further information see
on page 2-12).
3-9
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
J. Prime
N. Logout
B. Edit
D. Batch Total
E. Set Dispense Volume
F. Dispense Volume Counter
H. Interval Time Counter
K. Start/Stop/Pause
M. Screen Lock
O. Settings
until the display changes to zero.
"Priming the Pump
until the display
Drive"
Masterflex
Advertisement
Table of Contents
