Table of Contents
Advertisement
Section 3: Operation
L. FLOW DIRECTION: Tap DIRECTION to select either clockwise
direction.
M. SCREEN LOCK: Locking the screen disables all touchscreen functions. To lock the screen: Press and hold
UNLOCKED
unlock the screen: Press and hold LOCKED
N. LOGOUT: Tap to log out a user. NOTE: Th is option is only available if User Management is enabled in
Settings (for further information see
O. SETTINGS: Tap to access the Settings Screen (for further information see "Settings" on page 2-4).
Time Mode Edit Screen
Mode Name Banner
the previous screen
Tap to access the
On Time Edit Screen
Tap to access the
Flow Rate Edit Screen
Tap to access the
Tube Size Screen
Time Mode Operation
General Preparation:
•
Confi rm the correct tubing has been selected and is properly loaded into the pump drive (for further
information see
•
Confi rm all fl uids and containers are ready.
•
Switch the drive on using the power switch located at the rear of the drive. NOTE: If User Management
is enabled you may be prompted for a username and password (For further information see
Management" on page 2-8). Th e touchscreen display will revert to the previously used operation mode.
•
Confi rm that the tubing has been calibrated by checking that Calibration Complete
Time Mode Edit Screen (for further information see
•
If required, prime the pump before operation (for further information see
page 2-12).
3-6
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
until the icon changes to LOCKED
Tap to return to
On Time
Flow Rate
Tube Size
Logout
"Loading
Tubing" on page 2-10).
and a red border appears around the screen. To
until the icon changes to UNLOCKED
"User
Management" on page 2-8).
"Tube
Calibration" on page 2-13).
or counterclockwise
.
Off Time
Tap to access the
Interval Time Screen
Calibrate
Tap to access the
Tube Calibration Screen
Batch Total
Tap to access the
Batch Total Screen
Confirm
"User
is displayed on the
"Priming the Pump
Drive" on
fl ow
Masterflex
Advertisement
Table of Contents
