Table of Contents
Advertisement
Section 3: Operation
CONTINUOUS MODE
In Continuous Mode the pump will operate at a selected rpm and/or fl ow rate until stopped by the user.
Continuous Mode Run Screen
Th e Continuous Mode Run Screen is accessed by selecting CONTINUOUS from the Mode Selection
Screen.
A. Mode Name Banner
D. Tube Size
H. Flow Direction
A. MODE NAME BANNER: Tap the Mode Name Banner to return to the Mode Selection Screen.
B. CUMULATIVE VOLUME: Displays the current cumulative volume of fl uid that has been pumped. To
reset the cumulative volume: Press and hold CUMULATIVE VOLUME RESET
changes to zero.
C. FLOW RATE: Displays the current fl ow rate in the unit of measurement selected by the user. Tap to
access the Flow Rate Screen.
D. SIZE: Tap to access the Tube Size Screen.
E. CALIBRATE: Tap to access the Calibration Screen (for further information see
page 2-13). Once calibration has been completed for the current tube size Calibration Complete
be displayed.
F. PRIME: Press and hold to prime the pump drive (for further information see
on page 2-12).
G. START/STOP: Tap START to begin operation. Once operation has commenced STOP
displayed.
H. FLOW DIRECTION: Tap DIRECTION to select either clockwise
I. SCREEN LOCK: Locking the screen disables all touchscreen functions. To lock the screen: Press and
3-2
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
F. Prime
J. Logout
B. Cumulative Volume
C. Flow Rate
E. Calibrate
G. Start/Stop
I. Screen Lock
K. Settings
until the display
"Tube
Calibration" on
"Priming the Pump
will be
or counterclockwise
will
Drive"
.
Masterflex
Advertisement
Table of Contents
