Table of Contents
Advertisement
Section 4: Communication Specification
PROFIBUS
Profibus Mode
In Profi bus mode the pump will be operated remotely either in Continuous, Volume or Time mode.
Profibus Setup
Ensure your computer and the PLC are both connected to a network switch. Also verify the pump can send/
receive ping commands from your computer. Connect the DB-9 Profi bus cable on both the pump side as well
as the Profi bus connector either on the Profi bus module or the controller itself.
Profibus Settings
NOTE: Assuming the pump is online with the PLC and has been toggled into Profi bus mode:
To Select Profi bus Settings:
1.
Tap SETTINGS
2.
From the resulting MENU screen SCROLL
3.
Once that fi eld is selected you now enter the PROFIBUS SETTINGS screen. Here you can assign the
Profi bus address to be a value (in between 1 and 126). Th e default Profi bus address is 7.
4-6
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
.
down to page 3/3 and access PROFIBUS SETTINGS.
Masterflex
Advertisement
Table of Contents
