Table of Contents
Advertisement
Section 3: Operation
ANALOG INPUT MODE
CAUTION: Power must be turned off before connecting the external analog control cable to prevent
!
damage to the drive.
Th e B/T Digital Pump Drive can be controlled and monitored through the pump drive's 31-Pin female
connection port. See
Analog Input Mode Run Screen
Th e Analog Input Mode Run Screen will be displayed on the pump drive's touchscreen during analog input
operation. Th e screen displays the currently selected operation dispense settings from an external remote
control device. Th e Analog Input Mode Run Screen is accessed by selecting ANALOG INPUT from the
Mode Selection Screen.
A. Mode Name Banner
D. Flow Direction
A. MODE NAME BANNER: Displays the Mode Name as well as the currently selected input type
(ANALOG CURRENT or ANALOG VOLTAGE). Tap the Mode Name Banner to return to the Mode
Selection Screen.
B. PRIME: Press and hold to prime the pump drive (for further information see
on page 2-12).
C. START/STOP: During operation, the display will change from START
D. FLOW DIRECTION: Tap DIRECTION to select either clockwise
direction.
E. SCREEN LOCK: Locking the screen disables all touchscreen functions. To lock the screen: Press and
hold UNLOCKED
screen. To unlock the screen: Press and hold LOCKED
3-14
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
www.masterfl ex.com
B. Prime
F. Logout
until the icon changes to LOCKED
for more information.
until the icon changes to UNLOCKED
C. Start/Stop
E. Screen Lock
"Priming the Pump
to STOP
or counterclockwise
and a red border appears around the
Drive"
.
fl ow
.
Masterflex
Advertisement
Table of Contents
