Table of Contents
Advertisement
Section 2: Basic Setup & Settings
displayed.
5. Tap CONFIRM
Device Information
Th e Device Information Screen provides pump drive details such as MAC address, IP address, software
version, build date, and fi rmware version. Factory reset and updates are also accessed from the Device
Information Screen.
To access the Device Information Screen:
1. Tap SETTINGS
2. SCROLL
3. Tap DEVICE INFORMATION. Th e Device Information Screen will be displayed.
See also
"Firmware
Screen Saver
Th e B/T has a screen saver to help extend the display life of the touchscreen. After 30 minutes of inactivity
the B/T will enter sleep mode and the display will turn off . Tapping the touchscreen will reactivate the drive.
To enable or disable the screen saver:
1. Tap SETTINGS
2. SCROLL
3. Tap the SCREEN SAVER toggle to select either ON or OFF.
Device Name
Individual names can be assigned to each B/T Digital Pump Drive to make identifi cation easier when using
more than one pump.
To assign a pump drive name:
1. Tap SETTINGS
2. SCROLL
3. Tap DEVICE NAME. Th e Device Name Screen will be displayed.
4. Enter the desired pump name using the onscreen keypad (up to 8 characters).
5. Tap CONFIRM
2-6
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
.
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate DEVICE INFORMATION.
Updates" on page 5-1, and
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate SCREEN SAVER.
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate DEVICE NAME.
to save or CANCEL
"Restore Factory
Settings" on page 5-1.
to discard changes.
Masterflex
Advertisement
Table of Contents
