Table of Contents
Advertisement
Section 3: Operation
10. If required, adjustments can be made to any of the Volume Mode option settings during operation. To
make any adjustments:
a. Tap PAUSE
b. Tap CONTINUE
Saving Volume Mode Settings as a New Program
Changes made to mode parameters can be saved as a new program for easier access to frequently used settings.
NOTE: If User Management is enabled only users with authorization can create and modify programs (for
further information see
To save mode parameters to a new program:
1. If required, edit the Volume Mode settings as desired.
2. Tap MODE NAME BANNER to return to the Mode Selection Screen.
3. Tap NEW PROGRAM. NOTE: If NEW PROGRAM is not displayed on the Mode Selection Screen tap
SCROLL
4. Tap VOLUME. Th e Volume New Program Screen will be displayed with the last settings used in the
Volume Mode.
5. Tap PROGRAM1. If required, delete the characters using the back arrow on the onscreen keypad and
then enter the desired program name (up to 8 characters).
6. Tap CONFIRM to save or DELETE to cancel.
NOTE:
•
Once saved, new programs are added in alphabetical order to the bottom of the Mode Selection Screen.
•
If there are multiple programs tapping SCROLL
Volume Record
Th e Volume Record feature can be used to record unknown fl uid volumes.
General Preparation:
•
Confi rm the correct tubing has been selected and is properly loaded into the pump drive (for further
information see
•
Confi rm all fl uids and containers are ready.
•
Confi rm that the tubing has been calibrated by checking that Calibration Complete
Volume Mode Edit Screen (for further information see
•
If required, prime the pump before operation (for further information see
page 2-12).
To record a fl uid volume:
1. Tap VOLUME from the Mode Selection Screen. Th e Volume Mode Run Screen will be displayed.
2. Tap EDIT
3. Tap RECORD
3-12
Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
and then repeat steps 2–10 above.
to complete the pump operation once the desired changes have been made.
"User
Management" on page 2-8).
to view additional pages.
"Loading
Tubing" on page 2-10).
to access the Volume Mode Edit Screen.
. Th e Record Dispense Screen will be displayed.
will display additional pages.
"Tube
Calibration" on page 2-13).
"Priming the Pump
is displayed on the
Drive" on
Masterflex
Advertisement
Table of Contents
