Table of Contents
Advertisement
Section 6
6. Click and hold-down the "
Down Menu and select "
a) from within the Pull-Down Menu Selections.
The selected Field will highlight Blue, the Status
LED will flash at a
Figure 6-16 JCM Tool Suite Standard Edition
Screen Pull-Down Menu
Figure 6-16 JCM Tool Suite Standard
Edition Screen Pull-Down Menu
7. When "Download" is selected the "
loader Suite Edition Version X.XX
cally begin functioning, and the Screen shown in
Figure 6-17 will appear. Click on the "
Screen Button (Figure 6-17 a).
Figure 6-17 Browse Screen Button Location
Figure 6-17 Browse Screen Button Location
8. Select the appropriate DBV-500 Software Pro-
gram Version shown
Screen that appears and click on
Download File
the "
"
Open
Figure 6-18 DBV-500 Software Program Selec-
tion
Figure 6-18 DBV-500 Software Program Selection
NOTE: Select the correct DBV-500
Firmware for the Country desired.
P/N 960-100933R_Rev. 2 {EDP #233449}
DBV™ Series DBV-500 Banknote Acceptor
" Pull-
Service Mode
" (Figure 6-16
Download
Green
Color rate.
a
JCM Down-
" will automati-
Browse
a
Figure
6-18a
from the
in
Screen Button (Figure 6-18 b).
a
b
9. When the "
JCM Downloader Suite
appears, click on the center "
Screen Button (Figure 6-19 a) to begin the
Software download into the DBV-500 Unit.
The
Download
during the download operation (Figure 6-19 b),
and a
Blue Text Line
Button will display the download Percentage as
"Downloading :
The Status LED will flash a
longer interval during this operation.
Figure 6-19 Download Progress Screen 1
b
Figure 6-19 Download Progress Screen 1
"
10. When the download is complete, the "
Success. Reset Done. Waiting for USB Cable
Disconnection.
ure 6-20 a). Confirm that the Host's Checksum
and the Device Checksum's identically match
each other (Figure 6-20 b).
Figure 6-20 Download Completed Screen 1
b =
Figure 6-20 Download Completed Screen 1
This completes the DBV-500 Software Download-
ing Procedures.
Calibration
This section provides instructions for performing a
calibration of the DBV-500 Sensors.
NOTE: Refer to Figure 6-1 and Figure 6-2
for the necessary Tool and Harness
Connections and USB Cable Type
Requirements respectively.
© 2020 JAPAN CASH MACHINE CO., LTD.
6 - 4
Calibration and Testing
" Screen re-
"
Download
Screen will display a Progress Bar
below the Download Screen
XX%" (Figure 6-19 c).
Green
Color rate at a
a
c
Download
"
Blue
Text Line will appear (Fig-
a
Advertisement
Table of Contents
