Calibration and Testing
Stacking Movement Test
1. Launch the Performance Test Main Screen (See
Figure 6-48 "Performance Test Main Screen" on
page 6-10).
2. Click the "Performance Test" Pull-down Menu
and select the "
STACK_TEST
Figure 6-52 Stacking Movement Test Selection
a
Figure 6-52 Stacking Movement Test Selection
3. Click the "
"
Start
53 a) to begin the test.
Figure 6-53 Stacking Movement Test Start But-
ton
a
Figure 6-53 Stacking Movement Test Start Button
4. Confirm that the Stacking movement is perform-
ing normally.
5. Click the "
"
Stop
54 a) to end the test.
Figure 6-54 Stacking Movement Test Stop But-
ton
a
a
Figure 6-54 Stacking Movement Test Stop Button
P/N 960-100933R_Rev. 2 {EDP #233449}
DBV™ Series DBV-500 Banknote Acceptor
" (Figure 6-52 a).
Screen Button (Figure 6-
Screen Button (Figure 6-
6 - 1 1
Sensor Test
Nine (9) Tests exist within the Sensor Test Menu.
Table 6-2 lists each Sensor Test Item function.
Table 6-2 Sensor Test Items
Sensor
Test Purpose/
Procedure
Entrance Sensor
Cover/uncover each
Sensor by a
Banknote, and
confirm the Sensor
detects Banknote
existence properly
Centering Sensor
Seat/remove the
Cash Box and
Box Sensor
confirm the Sensor
detects Cash Box
placement
Entrance Sensor
Cover/uncover each
(When Sleep)
Sensor by a
Banknote, and
confirm the Sensor
detects Banknote
existence properly
Exit Sensor
The Sensor detects
Pusher Home
that the Pusher
Sensor
Mechanism is at a
Home Position or not
The Sensor detects
Centering Home
that the Centering
Sensor
Mechanism is at
Home Position or not
Validation Sensor
Cover/uncover each
Sensor by a
Banknote, and
confirm the Sensor
detects Banknote
existence properly
Validation
Reference Sensor
© 2020 JAPAN CASH MACHINE CO., LTD.
Section 6
PC Screen
Detected
NOT
ON
OFF