HIKVISION iDS-TCV500-B(I)/IM User Manual page 22

4. Optional: You can also do the following operations.
/ /
Tyre and Axle Recognition Unit User Manual
Figure 4-1 Real-Time Picture
● Level 1 Arming can only connect one client or web. The uploaded
pictures will not be stored in the storage card. The pictures in the
storage card will be uploaded to the level 1 arming.
● Level 2 Arming can connect three clients or webs. The pictures will
be uploaded to the client/web, and stored in the storage card.
● Disarming is to cancel the alarm status or real-time picture.
Click it to measure the license plate pixel. Click it again to disable the
measurement.
Click it to enable the ruler to measure the license plate.
Click it to enable manual capture.
Click it to set continuous capture parameters and the device will
capture pictures according to the set interval.
● Capture Times: Up to five pictures can be captured per continuous
capture.
● Interval: Up to four intervals can be set, and the default interval is
100 ms.
14