Table of Contents
Advertisement
Image in BMP Format if you want to output images in this format.
Mixed Target Upload Protocol
Uploads images of multiple targets such as humans and vehicles. You can enable the body
property to recognize clothes, bags, and other properties.
5. Optional: If you want to save the alarm information and pictures to the cloud storage, click
to set Cloud Storage. Refer to Set Cloud Storage for details.
6. Click Save.
7.1.4 Set Arm Host
The device can upload the captured pictures via the arm host.
Steps
Note
For level 1 arm, the pictures can be uploaded normally. If uploading failed, the device will
upload again. For level 2 arm, the pictures will be uploaded once. No more upload if uploading
failed. For level 3 arm, pictures will not be uploaded.
1. Go to Configuration → Network → Data Connection → Arm Upload.
2. Select Protocol Type.
Note
Supported functions vary with different models. The actual device prevails.
License Plate Upload Protocol
Uploads arming alarm images of the license plate. You can enable Upload Binary Image if you
need to upload binary images full of black or white pixel points. Enable Output Binary Image
in BMP Format if you want to output images in this format.
Mixed Target Upload Protocol
Tyre and Axle Recognition Unit User Manual
Figure 7-4 Set Arm Host
25
Advertisement
Table of Contents
