Table of Contents
Advertisement
2. Select Dual-NIC Mode.
Dual-Network Backup
Select it when the two network interfaces are connected to two network cables respectively.
When one network interface fails, the other network interface will be employed
automatically without influencing the data transmission.
Multi-Network Isolation
Select it when different LANs are connected. Set the IP addresses of different network
segments.
3. Set IPv4 Address, subnet mask, gateway and other network parameters.
NIC Type
Select a NIC (Network Interface Card) Type according to your network condition.
IPv6
Three IPv6 modes are available.
Tyre and Axle Recognition Unit User Manual
Figure 9-1 Set IP Address
39
Advertisement
Table of Contents
